The FOLIANT Vega 530 SF is a new generation of very compact industrial laminating machine, designed for a heavy duty “In-House” lamination of digital and offset outputs (max. format 53 x 75 cm). It is equipped with integrated deep pile suction feeder (original from offset printing machines), pneumatic high speed bump separator, adjustable dual decurl bar and overlap system. Due to its high pneumatic pressure system, format and performance the machine is suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B2 lamination too. The machine maximum speed is up to 20 m/min., while performance is over 1720 sheets per hour of B2 portrait (blank paper 200 gsm).


The FOLIANT Vega 530 SF is equipped with a rising pile suction feeder. Its feeding head origin is in offset printing machines. The Becker vacuum pump integrated in the machine frame is used for sheets front airing. The overlaps are controlled, in an „in-run“ mode. The accuracy is +/- 2 mm under-lap (in a constant speed). The feeder is fitted with a lifting plate and its capacity is a 28 cm pile of paper.


The FOLIANT Vega 530 SF laminator maximum sheet size is 53 x 75 cm. The minimum sheet size is 20 x 30 cm (A4).The FOLIANT Vega 530 SF machine is a single sided thermal industrial laminator, laminating the 115 – 500 gsm paper.

The machine needs an external source of pressured air for the pneumatic pressure system 6 – 8 bar, 150 l/min.

The laminating unit is equipped with an adjustable dual decurl bar that can change angle during the operation:

  • With a decurl blade for offset printed sheets decurling
  • With a decurl roller for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks).

The whole machine is controlled with an interactive, easy understandable icon based touch screen and its used control system includes many automation items for an easy control of the machine and a reliable lamination.

More automation: Comparing competitive products Vega 400 SF machine’s control system allows more automation like:

  • Intelligent interruption of jobs, without any machine’s re-installation or re-adjustment, it saves plenty of time
  • First sheets of a new job automatic passing through the gap between master rollers, to the best position. It makes it safety and easy.
  • Automatic regeneration of master pressure.

 The roll of a film is mounted on a quick-changed shaft with a film tension control breaker. The shaft capacity is up to 3000 m of the 24 - 42 microns film. Standard film rill core: 76 mm. The film holder unit is equipped with an in-line trim slitter and a perforating wheel.

The laminating process is made between two laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller. The pressure is pneumatically adjustable. The laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor. The warming up time is shorter than 8 minutes.


The integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers. The process is controlled from the machine control unit. The separated sheets are delivered into a vibrating jogger (optional) or adjustable reception unit (optional).

Laminating Films

The machine laminates the BOPP films (24 – 42 microns) and Nylon films (24 - 35 microns).


Maximal Speed
single side 20 m/min
Feeding System
automatic, Suction Feeder Foliant, Feeder's Capacity 28 cm
Automatic, PLC Controlled, Overlaps Accuracy ± 2 mm
Paper Weight
115–500 g/m²
Main Roller Pressure System
External, 150 l / min, 6-8 bar
Minimal Sheets Size (w×l)
20×30 cm
Maximal Sheets Size (w×l)
53×75 cm
Maximal Performance
1720 B2 / hour
Temperature Control
80–140 °C, Warming Up Time 8 min
Power Supply
3 f., 400V AC, 50-60 Hz
5000 W
Mechanical Parameters
Floorspace (w×l) 100×215 cm, Weight: 400 kg
Modular Stand
Pallet Stacker
Non-sticky pressure roller
Air Shaft